Limited edition model ordered by a music store by Fujigen. Probably a modified version.
One that appears to be based on the NTL, a higher-end model in the Neo-Classic series.
Two-piece lightweight ash body, maple neck, rosewood fingerboard. Pickups are Seymour Duncan SH-1N on the front and SH-4 on the rear, with an added SSL-1 center.
Pulling the volume pot turns on the front PU and pulling the tone pot turns on the coil tap.
There are some scratches and dings, but nothing noticeable.
The neck is almost straight and in good playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.
Serial Number: C210411
Year of manufacture: 2021
Country of manufacture: Japan
Case: Original soft case
Weight: 3.52kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.3mm
Neck thickness near 1st fret: 21.2mm
Neck thickness near 12th fret: 23.4mm
SCALE: 648mm (25.5″)
RADIUS: 254mm (10″-356mm (14″)
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment
specs
Item Rank
B+: Some scratches, but no problem for normal use
12 months old
Serial No.
C210411
Year of manufacture
2021
Country of manufacture
Japan
Case
Genuine soft case
Weight
3.52kg
Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.
Fret Remaining
No problem, there is enough fret height
String Height Low String Side
2.0mm above 12th fret
String height on treble string side
1.5mm above the 12th fret
Nut width
42.3mm
Neck thickness near 1st fret
21.2mm
Neck thickness near 12th fret
23.4mm
Scale
648mm (25.5″)
RADIUS
254mm (10″)-356mm (14″)
Strings for setup
ERNIE BALL 2223 / .009-.042 set
Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment
Reviews
There are no reviews yet.