[SN A051569] USED Fender Japan Fender Japan / TL52-95 Butterscotch Blonde [20]

This model is a reproduction of the first model of the Fender Telecaster, the ’52 model.
The body is made of ash, and the neck and fingerboard are made of maple for a crisp sound.
The pickguard is made of 1-ply pickguard with 5-point stoppers, and all screws are flat head screws.
The vintage-inspired tone of this guitar is superb.

* Front pickup has been replaced with Seymour Duncan STR-1.
Pickguard is bent due to age.
The bridge piece and strap pins have been replaced.
* After we received the guitar, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, electrical repair, and rubbed together, so it is in good playing condition.

There is a relocation mark on both of the two strap pins.
There is a ding on the neck around the 4th to 5th floor with paint dents, and a ding on the neck joint with paint chips at the bottom of the body back.
There are other minor scratches and dings.

Item rank: B+ (Good)

Year of manufacture: 1988
Truss rod: There is enough room.
Fret: 60-70%.
Accessories Hard case / Non-genuine
Country of Origin JAPAN
Weight 3.56kg
Serial A051569

Truss Rod: No problem, confirmed to be 60 degrees to the left and right
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.0mm
Neck thickness(near 1st fret)|20.9mm
Neck thickness (near 12th fret)|23.3mm
SCALE|648mm (25.5″)
RADIUS|184mm (7.25″)
Strings for setup|D’Addario EXL110 / .010-.046 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42.0mm

Neck Thickness (near 1st fret)
20.9mm

Neck Thickness (near 12th fret)
23.3mm

Scale
648mm (25.5″)

RADIUS
184mm (7.25″)

Strings for setup
D’Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment