This pedal combines two iconic Fuzz Face Distortion sounds, featuring the snarling, high-gain aggression of a silicon transistor and the smooth, shaggy warmth of a germanium transistor in a single circuit.
Knobs
1. OUTPUT knob adjusts volume level of effect
2. FUZZ knob adjusts intensity of effect
3. FOOTSWITCH toggles effect on/bypass (red LED indicates on)
Power
The MXR Hybrid Fuzz is powered by one 9-volt battery (remove bottom plate to install), a 9-volt AC adapter such as the Dunlop ECB003/ECB003EU, or an MXR BrickTM Series power supply.
Directions
- Run an instrument cable from your instrument to the CSP041s INPUT jack and another cable from the CSP041s OUTPUT jack to your amplifier.
- Start with knobs set fully counterclockwise.
- Turn effect on by depressing the footswitch.
- Rotate OUTPUT knob clockwise to increase volume or counterclockwise to decrease it.
- Rotate FUZZ knob clockwise to increase intensity of effect or counterclockwise to decrease it.
Input Impedance: > 15 k
Output Impedance: < 450 k
Max Output Level: -9.6dBU
Max Gain: +42 dB
Noise Floor: -87 dBU
Bypass: True Hardwire
Current Draw: 2.5 mA
Voltage Requirements: 9 volts DC
Reviews
There are no reviews yet.